Schneider Electric 61 user manual Parameter set switching, CHA1, CHA2, Cfps

Parameter set switching

The parameter set switching function (see the Programming Manual) can be used via the network or via the terminals.

To use this function via a network, simply assign one or two bits of the control word to parameter set switching via the [2 Parameter sets] (CHA1) and [3 Parameter sets] (CHA2) parameters.

The active set can be read in the "Active parameter set" (CFPS) parameter.

The parameter sets can be written via a network.

The parameter sets can be switched with the motor running.

Function parameters

Code		Description
CHA1	Parameter name:	Assignment for 2 sets
	Terminal display:	[2 Parameter sets]
	Logic address:	12902 = 16#3266	Type:		WORD (listing)
	CANopen index:	2063/3	Read/write:		R/WS
	INTERBUS index:	5FBD/3A	Factory setting:		0
	DeviceNet path:	A1/01/67
	See next page.
CHA2	Parameter name:	Assignment for 3 sets
	Terminal display:	[3 Parameter sets]
	Logic address:	12903 = 16#3267	Type:		WORD (listing)
	CANopen index:	2063/4	Read/write:		R/WS
	INTERBUS index:	5FBD/3B	Factory setting:		0
	DeviceNet path:	A1/01/68
	See next page.
CFPS	Parameter name:	Active parameter set
	Logic address:	12900 = 16#3264	Type:		WORD (listing)
	CANopen index:	2063/1	Read/write:		R
	INTERBUS index:	5FB9/EB
	DeviceNet path:	A1/01/65
	0 = The parameter set switching function is not configured
	1 = [Set 1 active] (CFP1): Parameter set no. 1 active
	2 = [Set 2 active] (CFP2): Parameter set no. 2 active
	3 = [Set 3 active] (CFP3): Parameter set no. 3 active
Value of the control bit assigned by [2 Parameter sets] (CHA1)				0	1	0	1
Value of the control bit assigned by [3 Parameter sets] (CHA2)				0	0	1	1
Value of "Active parameter set" (CFPS)				1	2	3	3
Active parameter set				1	2	3	3

67