Schneider Electric 61 user manual IP0, CMP0, DCC0, DrC0

Log parameters

Code			Description
IP0	Parameter name:	Extended status word on last fault
	Logic address:	7220 = 16#1C34		Type:	WORD (bit register)
	CANopen index:	202A/15		Read/write:	R
	INTERBUS index:	5FB9/6B		Unit:	-
	DeviceNet path:	85/01/15
	Value of the "Extended status word 0" (EtI) parameter, written to memory when the last fault occurred.
	See the possible values of the "Extended status word 0" (EtI) parameter.
CMP0	Parameter name:	Command word on last fault
	Logic address:	7230 = 16#1C3E		Type:	WORD (bit register)
	CANopen index:	202A/1F		Read/write:	R
	INTERBUS index:	5FB9/74		Unit:	-
	DeviceNet path:	85/01/1F
	Value of the "Command word" (CMd) parameter, written to memory when the last fault occurred.
	See the possible values of the "Command word" (CMd) parameter.
dCC0	Parameter name:	Command channel active on last fault
	Logic address:	64300 = 16#FB2C		Type:	WORD (listing)
	CANopen index:	-		Read/write:	R
	INTERBUS index:	5FBA/21		Unit:	-
	DeviceNet path:	-
	0: Terminals
	2: Graphic display terminal
	3: Modbus
	6: CANopen
	9: Network card
	10: "Controller Inside" card
	15: PowerSuite
drC0	Parameter name:	Reference channel active on last fault
	Logic address:	64310 = 16#FB36		Type:	WORD (listing)
	CANopen index:	-		Read/write:	R
	INTERBUS index:	5FBA/2A		Unit:	-
	DeviceNet path:	-
	0: Analog input terminals
	2: Graphic display terminal
	3: Modbus
	6: CANopen
	7: +/- speed terminals
	9: Network card
	10: "Controller Inside" card
	15: PowerSuite

108