Sharp SF-1120, SF-1020 service manual User simulation, 30 sec. This function can be cleared

Main code	Sub code	Content
53	06	ADF timing sensor adjustment
		When this simulation is executed, the paper exit reverse sensor original judgement level is adjusted. After
		completion of this adjustment, the original judgement level is displayed on the copy quantity display.
		Display range: 0 ∼ FFh (hexadecimal)

6. User simulation

This simulation allows to change and set the following setting which has been set when shipping from the factory.

(1) Functions which can be set and canceled by the user simulation

Function name		Function and setting content	Factory setting
	•	After completion of copying, when a certain time is passed, the machine returns to the initial state
Auto clear		automatically. The time to return to the initial state is set in the range of 30 - 120 sec in increment of	60 sec
		30 sec. This function can be cleared.
	•	When the copier is left without copying with the power ON, the power consumption is automatically
		lowered to 60Wh. The time to start this function is set in the range of 1 min - 120 min.
Pre-heat	• When this function operates, the pre-heat lamp on the operation panel is lighted.		15 min
		To return to the initial state:
		Press any key on the operation panel. (If the COPY button is pressed, the machine returns to the
		initial state and performs copying.)
		If also the original is set or the tray is pulled out, the machine returns to the initial state.
	•	When the copier is left without copying with the power ON, the power consumption is automatically
		lowered to 10Wh. The time to start this function is set in the range of 5 min - 120 min.
Auto power shut off	•	When this function operates, al the lamps on the operation panel except for the pre-heat lamp are	30 min
		turned off.
		To return to the initial state:
		Press the COPY button. The machine returns to the initial state.
	•	This function learns the use conditions of the copier to automatically control the time to start the
		pre-heat function and the auto power shut off function to the optimum level. This function can be
Auto pre-heat control		activated or inactivated.	Cancel
	• When this function is activated, the time settings in the pre-heat function and the auto power shut off
		function are ignored.
Auto document	•	By use of the auto document feeder (option), originals of different sizes are fed manually.
feeding unit manual	•	When this function is activated, set an original during the original feed lamp blinks after completion	Cancel
document feed mode		of copying of the previous original, and the original is fed automatically.
Sorter take-out mode	•	When the sorter (option) is installed, the interval between bins can be extended to facilitate to take	Set
		out the copy by pressing the copy take-out key.
Auto paper selection	•	This function automatically selects the copy paper which is of the same size of the original (A3, B4,	Set
		A4, B5 size only) which is set on the table.
	•	When paper is exhausted during copying, if paper of the same size is set in the same direction on
Auto tray selection		another tray, the tray is automatically selected to allow to copy.	Set
		This function can be canceled.

*Note: The value of power consumption in pre-heat or in auto power shut off may vary according to the use conditions.

8 – 20