3-4. Upper separation pawl replacement
1Remove the fusing unit, and remove the cover.
2Put the fusing unit so that the paper guide is on the lower side of the fusing unit (the separation pawl is on the upper side).
3Remove the tension spring, hold the separation pawl tip and remove it from the supporting section, and remove it from the unit by tilting.
For assembly, reverse the disassembly procedures.
3-5. Lower heat roller replacement
1Remove the fusing unit.
2With the lower separation pawl upright, slide it to the rear frame side and keep the lower separation pawl upright.
3Remove the lower heat roller together with the bearing. For assembly, reverse the disassembly procedures.
(Note for assembly)
Assemble so that the lower separation pawl is on the upper side of the lower heat roller. (At that time, return the separation pawl which was set upright in procedure (2).)
3-6. Lower separation pawl replacement
1Remove the fusing unit.
2Remove the lower heat roller.
3Remove three screws and remove the lower separation pawl unit.
5Remove the tension spring, hold the separation pawl tip to remove it from the supporting section, and remove it by tilting.
6 – 6
