Sharp SF-1120, SF-1020 service manual Transport unit

(Note for assembly)

Attach the paper feed roller so that the one-way clutch is on the rear frame side. (Be careful of the direction.)

Attach the roller holder as shown below.

One-way clutch side

1-6. Lower paper feed unit

Perform similarly for the optional two-stage paper feed unit.

Remove two screws and remove the lower paper feed unit.

1-7. Lower separation roller

Perform similarly for the optional two-stage paper feed unit.

1Remove the lower paper feed unit. Refer to 1-6.)

2Remove the paper feed frame. (4 screws, 2 connector)

3Remove the separation roller.

1-8. Transport roller

Perform similarly for the optional paper feed unit.

1Remove the lower paper feed unit. (Refer to 1-6.)

2Remove the stopper, slide the bearing, and remove the transport roller.

1-9. Lower paper feed roller/take-up roller

For removal of these rolls, refer to 1-2 (Paper feed roller ass'y) and

1-5 (Paper feed roller, take-up roller).)

2. Transport unit

2-1. Resist roller, transfer roller

1Open the front cover.

2Release two lock pawls of the TC case, and lift the front side of the TC case to remove.

6 – 3