Connecting your camcorder to a computer using the USB cable (For Windows users)

Installing the USB driver

Raccordement du caméscope à un ordinateur par le câble USB (Utilisateurs de Windows)

Installation du pilote USB
Start the following operation without connecting the USB cable to the computer.

Connect the USB cable according to “Making the computer recognise your camcorder.”

If you are using Windows 2000, log in with permission of administrators.

If you are using Windows XP, log in with permission of computer administrators.

(1) Turn on a computer and allow Windows to load.

(2) Insert the supplied CD-ROM in the CD-ROM drive of the computer. The application software starts up.

If the screen does not appear, double-click “My Computer,” then “ImageMixer” (CD- ROM Drive).

(3) Select “Handycam” on the screen.

The title screen appears.

(4) Move the cursor to “USB Driver” and click. This starts USB driver installation.

Effectuez les opérations suivantes avant de raccorder le câble USB à l’ordinateur.

Raccordez le câble USB selon les instructions de « Reconnaissance du caméscope par l’ordinateur ».

Si vous utilisez Windows 2000, connectez-vous avec la permission des administrateurs.

Si vous utilisez Windows XP, connectez-vous avec la permission des administrateurs de l’ordinateur.

(1) Allumez votre ordinateur et attendez que Windows soit chargé.

(2) Insérez le CD-ROM fourni dans le lecteur de CD-ROM de votre ordinateur. Le logiciel démarre.

Si l’écran n’apparaît pas, double-cliquez sur

«My Computer » (Poste de travail), puis sur

«ImageMixer » (lecteur CD-ROM).

(3) Sélectionnez « Handycam » sur l’écran.

Click/

Cliquez ici.

L’écran-titre apparaît.

(4) Posez le curseur sur « USB Driver » et cliquez. L’installation du pilote USB commence.

Click/

Cliquez ici.

ordinateur un sur d’images Visionnage computer a with images Viewing

189