
Types of trouble and how to correct trouble
OthersSymptom | Cause and/or Corrective Actions |
A title is not recorded. | • The cassette has no Cassette Memory. |
| c Use the cassette with Cassette Memory (p. 123). |
| • The Cassette Memory is full. |
| c Erase unnecessary title (p. 125). |
| • The cassette is set to prevent accidental erasure. |
| c Slide the |
| (p. 270). |
| • The tape has a blank portion in the recorded portion. |
| c Superimpose the title to the recorded position (p. 123). |
A cassette label is not recorded. | • The cassette has no Cassette Memory. |
| c Use the cassette with Cassette Memory (p. 128). |
| • The Cassette Memory is full. |
| c Erase unwanted data (p. 125). |
| • The tape is set to prevent accidental erasure. |
| c Slide the |
| (p. 270). |
Digital program editing to the tape | • The input selector on the VCR is not set correctly. |
does not function. | c Set the selector correctly, then check the connection between |
| the VCR and your camcorder (p. 101). |
| • Your camcorder is connected to DV equipment of other than |
| Sony using the i.LINK cable. |
| c Set it to IR (p. 101). |
| • Setting programme on a blank portion of the tape is attempted. |
| c Set the programme again on a recorded portion (p. 108). |
| • The synchronisation of your camcorder and the VCR is not |
| adjusted. |
| c Adjust the synchronisation of the VCR (p. 105). |
| • The IR SETUP code is not correct. |
| c Set the correct code (p. 104). |
Digital program editing to the | • Setting programme on a blank portion of the tape is attempted. |
“Memory Stick” does not function. | c Set the programme again on a recorded portion (p. 161). |
The Remote Commander supplied | • COMMANDER is set to OFF in the menu settings. |
with your camcorder does not work. | c Set it to ON (p. 233). |
| • Something is blocking the infrared rays. |
| c Remove the obstacle. |
| • The batteries are inserted in the battery holder with the + – |
| polarities incorrectly matching the + – marks. |
| c Insert the batteries with the correct polarity (p. 295). |
| • The batteries are dead. |
| c Insert new ones (p. 295). |
The picture from a TV or VCR does | • DISPLAY is set to |
not appear even when your | c Set it to LCD (p. 233). |
camcorder is connected to the |
|
outputs on the TV or VCR. |
|
|
|
| (continued on the following page) |
dépannage de Guide Troubleshooting
251