Step 2 Setting the date and time

Set the date and time when you use your camcorder for the first time. The “CLOCK SET” indicator will appear each time you set the POWER switch to CAMERA or MEMORY unless you set the date and time settings.

If you do not set the date and time, “-- -- ----” and “--:--:--” are recorded on the tape or the “Memory Stick” as the data code.

If you do not use your camcorder for about three months, the date and time settings may be released (bars may appear) because the built-in rechargeable battery installed in your camcorder will have been discharged (p. 279). In this case, charge the built-in rechargeable battery, then set your area, the summer time, the year, the month, the day, the hour and the minute.

(1) Set the POWER switch to CAMERA or

MEMORY.

(2) Press FN (Function) to display PAGE1 (p. 33).

(3) Press MENU to display the menu.

(4) Press r/R to select , then press EXEC.

(5) Press r/R to select CLOCK SET, then press EXEC.

(6) Press r/R to select your area, then press EXEC.

(7) Press r/R to select whether your area is in the summer time or not, then press EXEC.

(8) Press r/R to select a desired year, then press EXEC.

(9) Set the month, day and hour with the same procedure as step 8.

(10) Press r/R to set the minute, then press EXEC by the time signal. The clock starts to move.

2e étape Réglage de la date et de l’heure

Réglez la date et l’heure la première fois que vous utilisez le caméscope. Si vous ne le faites pas, l’indicateur « CLOCK SET » s’affichera chaque fois que vous mettrez le commutateur POWER sur CAMERA ou MEMORY.

Si vous ne réglez pas la date et l’heure,

«-- -- ---- » et « -- : -- : -- » sont enregistrés sur la cassette ou le « Memory Stick » à la place du code de données.

Si vous n’utilisez pas votre caméscope pendant trois mois environ, la date et l’heure seront effacées (des tirets apparaissent à la place) parce que la pile installée dans le caméscope est déchargée (p. 279). Dans ce cas, rechargez la pile interne et réglez le fuseau, l’heure d’été, l’année, le mois, le jour, les heures et enfin les minutes.

(1) Réglez le commutateur POWER sur CAMERA ou MEMORY.

(2) Appuyez sur FN (Fonction) pour afficher la PAGE1 (p. 33).

(3) Appuyez sur MENU pour afficher le menu.

(4) Appuyez sur r/R pour sélectionner , puis appuyez sur EXEC.

(5) Appuyez sur r/R pour sélectionner CLOCK SET, puis appuyez sur EXEC.

(6) Appuyez sur r/R pour sélectionner le fuseau, puis appuyez sur EXEC.

(7) Appuyez sur r/R pour sélectionner l’heure d’été ou l’heure d’hiver, puis appuyez sur EXEC.

(8) Appuyez sur r/R pour sélectionner l’année, puis appuyez sur EXEC.

(9) Réglez le mois, le jour et l’heure en procédant comme à l’étape 8.

(10) Appuyez sur r/R pour régler les minutes, puis appuyez sur EXEC au top horaire. L’horloge se met en marche.

30