Viewing pictures recorded on tape on a computer – USB Streaming (For Windows users)

Notes

•When you view images on a computer with the USB connection, the following may occur. This is not a malfunction.

The image shakes up and down.

Some images are not displayed correctly due to noise, etc.

Some images are displayed with the cracking noise.

Images of different colour systems to that of your camcorder are not displayed correctly.

•When your camcorder is during standby with a cassette inserted, it turns off automatically after five minutes.

•We recommend setting DEMO MODE to OFF in the menu settings when your camcorder is during standby, and no cassette is inserted.

•Indicators on the screen of your camcorder do not appear on images that are captured into the computer.

•If you capture a fast moving picture, the monitor window may not move smoothly. You can make the picture move more smoothly by shifting the upper right slider on the bottom of the monitor window to the left, although this reduces the picture quality.

•You cannot carry out any “Memory Stick” operations during the USB Streaming function.

If image data cannot be transferred by the USB connection

The USB driver has been registered incorrectly as the computer was connected to your camcorder before installation of the USB driver was complete. Reinstall the USB driver following the procedure on page 196.

If any trouble occurs

Close all running applications, then restart the computer.

Carry out the following operations after quitting the application:

Disconnect the USB cable.

Turn the POWER switch to the other position on your camcorder.

Visionnage sur un ordinateur d’images enregistrées sur une cassette – USB Streaming (Utilisateurs de Windows)

Remarques

•Les phénomènes suivants peuvent se présenter lorsque vous regardez les images sur l’ordinateur par une connexion USB. C’est normal.

L’image vacille perpendiculairement.

Certaines images sont parasitées, etc.

Un craquement est audible pendant l’affichage de certaines images.

Les images enregistrées dans un autre système couleur que celui du caméscope ne sont pas affichées correctement.

•Si le caméscope est en mode de pause et qu’une cassette est insérée, il s’éteint automatiquement au bout de cinq minutes.

•Il est conseillé de régler DEMO MODE sur OFF

dans les paramètres du menu lorsque le

 

caméscope est en mode de pause et qu’aucune

Viewing

cassette n’est insérée.

 

•Les indicateurs affichés à l’écran du caméscope

 

n’apparaissent pas sur les images saisies par

images

•Si vous saisissez une image animée très rapide,

l’ordinateur.

 

l’image dans la fenêtre de contrôle risque d’être

with

saccadée. L’image sera moins saccadée si vous

poussez le curseur supérieur droit au bas de la

a

computer

fenêtre de contrôle vers la gauche, mais elle

 

sera de moins bonne qualité.

 

•Vous ne pouvez pas effectuer d’opérations avec

 

le « Memory Stick » pendant l’emploi de la

 

fonction USB Streaming.

Visionnage

Si les images ne peuvent pas être transférées

 

par la connexion USB

 

Le pilote USB a mal été enregistré car le

d’images

le pilote USB en procédant comme indiqué à la

caméscope a été raccordé à l’ordinateur avant

 

l’installation complète du pilote USB. Réinstallez

 

page 196.

unsur

En cas de problème

ordinateur

Fermez toutes les applications, puis redémarrez

 

l’ordinateur.

 

Effectuez les opérations suivantes après avoir

 

fermé l’application :

 

Débranchez le câble USB.

Changez la position du commutateur POWER sur le caméscope.

203