Sony DCR-TRV75E manual 227

Changing the menu settings

					POWER
Icon/item		Mode	Meaning		switch
	VCR SET
	HiFi SOUND	z STEREO	To play back the stereo tape or dual sound track tape
			with main and sub sound (p. 269)
		1	To play back the stereo tape with the left sound or the
			dual sound track tape with main sound
		2	To play back the stereo tape with the right sound or the
			dual sound track tape with sub sound
	AUDIO MIX	——	To adjust the balance between stereo 1 and stereo 2
			(p. 122)
			ST1	ST2
	A/V t DV OUT z OFF		To output digital images and sound in analog format
			using your camcorder
		ON	To output analog images and sound in digital format
			using your camcorder (p. 218)
	NTSC PB	z ON PAL TV	To play back a tape recorded in the NTSC colour
			system on a PAL system TV
		NTSC 4.43	To play back a tape recorded in the NTSC colour
			system on a TV with the NTSC 4.43 mode
	LCD/VF SET
	LCD B.L.	z BRT NORMAL To set the brightness on the LCD screen normal
		BRIGHT	To brighten the LCD screen
	LCD COLOUR	——	To adjust the colour on the LCD screen with r/R

		Low intensity	High intensity
VF B.L.	z BRT NORMAL To set the brightness on the viewfinder screen to
		normal
	BRIGHT	To brighten the viewfinder screen

Note on NTSC PB

When you play back a tape on a Multi System TV, select the best mode while viewing the picture on the TV.

Notes on LCD B.L. and VF B.L.

•When you select BRIGHT, battery life is reduced by about 10 percent during recording. •When you use power sources other than the battery pack, BRIGHT is automatically selected.

Even if you adjust LCD B.L., LCD COLOUR and VF B.L.

The recorded picture will not be affected.

(continued on the following page)

caméscope du Personnalisation Camcorder Your Customising

227