Using the viewfinder

 

Utilisation du viseur

Turn the LCD panel over and move it back to your camcorder body with the LCD screen facing out. You can operate with the touch panel using the viewfinder.

Use the viewfinder when operating camera brightness and fader on the touch panel.

The POWER switch should be set to

or.

Operate by touching the panel.

(1) Turn the LCD panel over and move it back to your camcorder body with the LCD screen facing out.

(2) Press OFF. The PANEL OFF indicator appears on the screen.

(3) Press OK. The LCD screen is turned off.

(4) Using the viewfinder, press the LCD screen. EXPOSURE, OK, ON and FADER (only when the POWER switch is set to CAMERA) appear.

(5) Press the LCD screen and select a desired item, then press OK.

EXPOSURE: Adjust the exposure by pressing –/+.

FADER: Press FADER until a desired fader mode appears.

The indicator changes as follows: FADER t M. FADER t BOUNCE t MONOTONE t OVERLAP t WIPE t DOT t (no indicator)

ON:

The LCD screen lights up.

Vous pouvez tourner complètement l’écran LCD et le rabattre contre le caméscope avec l’écran LCD orienté vers l’extérieur. Vous pouvez utiliser ainsi l’écran tactile tout en regardant dans le viseur.

Utilisez le viseur pendant le réglage de la luminosité et du fondu sur l’écran tactile.

Le commutateur POWER doit être en position ou .

Utilisez les touches de l’écran tactile.

(1) Tournez l’écran LCD et rabattez-le contre le caméscope avec l’écran LCD orienté vers l’extérieur.

(2) Appuyez sur OFF. L’indicateur PANEL OFF apparaît sur l’écran.

(3) Appuyez sur OK. L’écran LCD s’éteint.

(4) Tout en utilisant le viseur, appuyez sur l’écran LCD. EXPOSURE, OK, ON et FADER (seulement lorsque le commutateur POWER est en position CAMERA) apparaissent.

(5) Appuyez sur l’écran LCD et sélectionnez une option, puis appuyez sur OK.

EXPOSURE : Ajustez l’exposition en appuyant sur –/+.

FADER : Appuyez sur FADER jusqu’à ce que le mode de transition souhaité apparaisse.

L’indicateur change comme suit : FADER t M. FADER t BOUNCE t MONOTONE t OVERLAP t WIPE t DOT t (pas d’indicateur)

ON : L’écran LCD s’allume.

avancées Opérations – Enregistrement Operations Recording Advanced

87