Professional Access Point
Administrator Guide
a primary path via Ethernet and a secondary (backup) wireless path via a WDS link. If the Ethernet connection goes down, STP would reconfigure its map of the network and effectively fix the down network segment by activating the backup wireless path.
The Professional Access Point does not provide STP. Without STP, it is possible that both connections, or paths, may be active at the same time, resulting in an endless loop of traffic on the LAN.
Therefore, be sure not create loops with either WDS bridges or combinations of Wired (Ethernet) connections and WDS bridges.
For more information, see the "Do not create loops" note under “Configuring WDS Settings” on page 156.
Security Considerations Related to WDS Bridges
Static Wired Equivalent Privacy (WEP) is a data encryption protocol for 802.11 wireless networks. Both access points in a given WDS link must be configured with the same WDS security settings. For static WEP, either a static
You can enable Static WEP on the WDS link (bridge). When WEP is enabled, all data exchanged between the two access points in a WDS link is encrypted using a fixed WEP key that you provide. USRobotics recommends using Static WEP for your WDS link and the highest level of security available for the individual client networks that you are bridging.
For more information about the effectiveness of different security modes, see “Security” on page 101. This topic also covers use of None as the security mode for
Navigating to WDS Settings
To specify the details of traffic exchange from this access point to others, click the Advanced menu’s Wireless Distribution System tab, and update the fields as described below.
