USRobotics Instant802 APSDK Set Security to None, USR5453-AP#set interface wlan0 security none

Professional Access Point

Administrator Guide

Set Security to None

USR5453-AP#set interface wlan0 security none

Set Security to Static WEP

1.Set the Security Mode

2.Set the Transfer Key Index

3.Set the Key Length

4.Set the Key Type

5.Set the WEP Keys

6.Set the Authentication Algorithm

7.Get Current Security Settings After Re-Configuring to Static WEP Security Mode

1. Set the Security Mode

USR5453-AP#set interface wlan0 security static-wep

2. Set the Transfer Key Index

The following commands set the Transfer Key Index to 4.

USR5453-AP# USR5453-AP# USR5453-AP# USR5453-AP#

set interface wlan0 wep-default-key 1 set interface wlan0 wep-default-key 2 set interface wlan0 wep-default-key 3 set interface wlan0 wep-default-key 4

3. Set the Key Length

For the CLI, valid values for Key Length are 40 bits or 104 bits.

Note

The Key Length values used by the CLI do not include the initialisation vector in the length. On the Web User Interface, longer Key Length values may be shown which include the 24-bit initialisation vector. A Key Length of 40 bits (not including initialisation vector) is equivalent to a Key Length of 64 bits (with initialisation vector). A Key Length of 104 bits (not including initialisation vector) is equivalent to a Key Length of 128 bits (which includes the initialisation vector).

To set the WEP Key Length, type one of the following commands:

To set the WEP Key Length to 40 bits:	set	interface	wlan0	wep-key-length	40
To set the WEP Key Length to 104 bits:	set	interface	wlan0	wep-key-length	104

In this example, you will set the WEP Key Length to 40.

USR5453-AP#set interface wlan0 wep-key-length 40

4. Set the Key Type

Valid values for Key Type are ASCII or Hex. The following commands set the Key Type.

To set the Key Type to ASCII:	set	interface	wlan0	wep-key-ascii	yes
To set the Key Type to Hex:	set	interface	wlan0	wep-key-ascii	no

Class Structure, Commands, and Examples - 216