USRobotics Instant802 APSDK manual Radio Settings, Creating VWN Two on Radio One with WPA security

Professional Access Point

Administrator Guide

Creating VWN 'Two' on Radio One with WPA security

To configure the second Virtual Wireless Network, repeat steps 1-3 as described above (in Configuring Virtual Wireless Network "One" on Radio One) with the following differences:

•Create a second VLAN ID from the Web User Interface with a new SSID

•In the CLI commands, replace wlan0bssvwn1 with wlan0bssvwn2.

Radio Settings

Note

Before configuring this feature, make sure you are familiar with the names of the interfaces as described in “Understanding Interfaces as Presented in the CLI” on page 190. The interface name you reference in a command determines whether a setting applies to a wired or wireless interface or to the Internal or Guest network.

This table shows a quick view of Radio Settings commands and provides links to detailed examples.

Radio Setting Command

Example

Get Radio Settings	get radio
	get radio wlan0
	get radio wlan0 detail
Get IEEE 802.11 Radio Mode	get radio wlan0 mode
Get Radio Channel	get radio wlan0 channel
Get Basic Radio Settings	get radio wlan0
Get All Radio Settings	get radio wlan0 detail
Get Supported Rate Set	get supported-rate
Get Basic Rate Set	get basic-rate
Configure Radio Settings	See detailed examples in:
	“1. Turn the Radio On or Off” on page 233
	“2. Set the Radio Mode” on page 233
	“3. Enable or Disable Super G” on page 233
	“4. Set the Beacon Interval” on page 233
	“5. Set the DTIM Period” on page 233
	“6. Set the Fragmentation Threshold” on page 233
	“7. Set the RTS Threshold” on page 234
	“8. Configure Basic and Supported Rate Sets” on page 234

Get IEEE 802.11 Radio Mode

To get the current setting for radio Mode:

USR5453-AP#get radio wlan0 mode g

Class Structure, Commands, and Examples - 230