What’s Next?, Snmp Support | USRobotics Instant802 APSDK guide

Professional Access Point

Administrator Guide

•Virtual Local Area Network (VLAN) support

SNMP Support

The Professional Access Point includes the following standard Simple Network Protocol (SNMP) Management Information Bases (MIB):

•SNMP v1 and v2 MIBs

•IEEE802.11 MIB

•Four USRobotics proprietary MIBs support product, system, channel, and wireless system statistics.

Maintainability

•Status, monitoring, and tracking views of the network including session monitoring, client associations, transmit/receive statistics, and event log

•Link integrity monitoring to continually verify connection to the client, regardless of network traffic activity levels

•Reset configuration option

•Firmware upgrade

•Backup and restore of access point configuration

•Backup and restore of user database for built-in RADIUS server (when using IEEE 802.1x or WPA/ WPA2 Enterprise (RADIUS) security mode)

What’s Next?

Are you ready to get started with wireless networking? Read through the “Pre-Launch Checklist: Default Settings and Supported Administrator/Client Platforms” on page 15, and then follow the steps in “Setting Up and Launching Your Wireless Network” on page 23.

Overview - 14

Image 14

USRobotics Instant802 APSDK manual What’s Next?, Snmp Support, Maintainability

Contents

Professional Access Point Administrator Guide R46.1224.00 rev 2.0 07/06Page Professional Access Point Administrator Guide USA Professional Access Point Administrator Guide Contents Class and Field Reference Class Structure, Commands, and ExamplesAdvanced Support Information Robotics Corporation Two 2 Year Limited Warranty Viii Administrator Audience Online Help Features Recommended Settings, Notes and Cautions Typographical Conventions Getting Started Wireless Features Features and BenefitsIeee Standards Support and Wi-Fi Compliance Security Features Networking Guest InterfaceClustering and Auto-Management Maintainability What’s Next?Snmp Support Professional Access Point Default Settings for the Professional Access Point Option Default Settings Related Information Security Mode None Ieee 802.11 ModeTransmit Power Authentication Type Required Software or Component Description Administrator’s ComputerWhat the Access Point Does Not Provide Wireless Client Computers Required Component Description Required Component How Does the Access Point Obtain an IP Address at Startup?Dynamic IP Addressing Recovering an IP Address Static IP Addressing Professional Access Point Administrator Guide What’s inside the Access Point? Unpack the access pointAccess Point Hardware and Ports Connect the access point to network and power UK Users Hardware Connections for a Guest Vlan Professional Access Point Administrator Guide Professional Access Point Administrator Guide Professional Access Point Administrator Guide Log on to the Web User Interface Viewing Basic Settings for Access PointsField Default Setting Username Configure Basic Settings and start the wireless network Default Configuration Wall Mounting the Access Point Make Sure the Access Point is Connected to the LAN Test LAN Connectivity with Wireless Clients Web User Interface Navigating to Basic Settings MAC Address Review / Describe the Access PointField Description Firmware Version Administrator Password again Provide Administrator Password and Wireless Network NameAdministrator Password Wireless Network Name Ssid Field Set Configuration Policy for New Access PointsNew Access Points Update Basic Settings Summary of Settings Icon Description Basic Settings for a Standalone Access PointYour Network at a Glance Understanding Indicator Icons Professional Access Point Administrator Guide Access Points Cluster Navigating to Access Points Management Understanding Clustering What Kinds of APs Can Cluster? What is a Cluster?How Many APs Can a Cluster Support? Settings Not Shared by the Cluster Cluster Formation Cluster ModeStandalone Mode Cluster Size and Membership Understanding Access Point SettingsAuto-Synchronization of Cluster Configuration Intra-Cluster Security Removing an Access Point from the Cluster Modifying the Location Description Adding an Access Point to a Cluster Http//IPAddressOfAccessPoint Professional Access Point Administrator Guide Professional Access Point Administrator Guide User Management Adding a User Navigating to User Management for Clustered Access PointsViewing User Accounts Enabling a User Account Editing a User AccountEnabling and Disabling User Accounts Real Name Backing Up and Restoring a User Database Restoring a User Database from a Backup FileRemoving a User Account Disabling a User Account Professional Access Point Administrator Guide Professional Access Point Administrator Guide Sessions Navigating to Session Monitoring Understanding Session Monitoring Information User AP Location User MAC Idle Rate Sorting Session Information Viewing Session Information for Access PointsSignal Utilization Rx Total Tx Total Error Rate Refreshing Session Information Professional Access Point Administrator Guide Channel Management How it Works Overview Navigating to Channel ManagementUnderstanding Channel Management Overlapping Channels Background Information Configuring and Viewing Channel Management Settings Example a Network before and after Channel Management Stopping/Starting Automatic Channel Assignment IP Address Band Current Locked Viewing Current Channel Assignments and Setting LocksViewing Last Proposed Set of Changes IP Address Current Proposed Change channels if interference is reduced by at least Use these channels when applying channel assignmentsAdvanced Determine if there is better set of channels every Apply channel modifications even when the network is busy Professional Access Point Administrator Guide Wireless Neighborhood Navigating to Wireless Neighborhood Understanding Wireless Neighbourhood Information Cluster Viewing Wireless NeighborhoodDisplay neighboring APs Neighbors Viewing Details for a Cluster Member Details for a Cluster Member AP Beacon Age SignalChannel Status Interfaces Ethernet Wired Settings Wireless Settings Events Log Relay Host for Kernel Messages SYSLOGD=-r Setting Up the Log Relay HostUnderstanding Remote Logging Tmp/APsyslog Etc/init.d/sysklogd restart Log Relay Host EnabledEnabled Relay Host Transmit/Receive Statistics Events Log Name Ssid ErrorsClient Associations Total Packets What is the Difference Between an Association and a Session? Link Integrity Monitoring Neighboring Access Points Select AP Detection Enabled Privacy Beacon IntType Rates # of BeaconsLast Beacon Professional Access Point Administrator Guide Ethernet Wired Settings Advanced Navigating to Ethernet Wired Settings Configuring an Internal LAN and a Guest Network Setting the DNS NameManaging Guest Access Enabling and Disabling Guest Access Specifying a Virtual Guest Network Guest AccessFor Guest access, use Configuring Internal Interface Ethernet Settings Virtual Wireless Networks DNS Nameservers Default GatewayStatic IP Address Subnet Configuring Guest Interface Ethernet Wired SettingsUpdating Settings Professional Access Point Administrator Guide Wireless Settings Navigating to Wireless Settings Configuring 802.11d Regulatory Domain Support 802.11d Regulatory Domain Support Mode Channel Configuring the Radio InterfaceConfiguring Internal LAN Wireless Settings Configuring Guest Network Wireless Settings Read-only field Security Understanding Security Issues on Wireless NetworksHow Do I Know Which Security Mode to Use? When to Use No Security Encryption Algorithm User AuthenticationKey Management Encryption Algorithms When to Use WPA/WPA2 Enterprise Radius Does Prohibiting the Broadcast of Ssid Enhance Security? How Does Station Isolation Protect the Network? Broadcast SSID, Station Isolation, and Security Mode Navigating to Security SettingsConfiguring Security Settings None Static WEP Professional Access Point Administrator Guide Bits Transfer Key IndexKey Length Key Type Authentication Algorithm Open System Shared Key Both Example of Using Static WEP Static WEP with Transfer KEY Indexes on Client Devices Ieee WPA/WPA2 Personal PSK Authentication ServerEnable Radius Accounting Radius IP WPA Versions Cipher Suites WPA/WPA2 Enterprise Radius Key Enable pre-authentication Improving the security of the network Enter the Radius IP Professional Access Point Administrator Guide Configuring a Guest Network on a Virtual LAN Guest LoginConfiguring Guest Access Using Virtual LANs DSL/T1 Configuring the Welcome Screen Captive Portal Using the Guest Network Configuring Guest Access without Virtual LANs Configuring a Guest Network on a Dedicated Access Point Virtual Wireless Networks Navigating to Virtual Wireless Network Settings One Configuring VLANsVirtual Wireless Network Two Ton Professional Access Point Administrator Guide Understanding Radio Settings Radio Status On/Off Navigating to Radio SettingsConfiguring Radio Settings Super G ModeIeee 802.11b Maximum Stations Rate Sets Broadcast a subset of its supported rate sets Professional Access Point Administrator Guide Navigating to MAC Filtering Settings MAC Filtering Using MAC Filtering Filter Stations List Professional Access Point Administrator Guide Specifying Limits for Utilization and Client Associations Load BalancingUnderstanding Load Balancing Load Balancing and QoS Navigating to Load Balancing SettingsConfiguring Load Balancing Stations Threshold for Disassocia Utilization for No New AssociationsUtilization for Disassociation Tion To apply your changes, click Update Settings QoS and Load Balancing Quality of ServiceUnderstanding QoS 802.11e and WMM Standards Support QoS Queues and Parameters to Coordinate Traffic Flow Professional Access Point Administrator Guide Random Backoff and Minimum / Maximum Contention Windows Navigating to QoS Settings Configuring QoS Queues Configuring AP Edca Parameters Enabling/Disabling Wi-Fi Multimedia Configuring Station Edca Parameters Data 0 Voice Txop Limit Transmission Opportunity Limit Professional Access Point Administrator Guide Using WDS to Bridge Distant Wired LANs Wireless Distribution SystemUnderstanding the Wireless Distribution System Backup Links and Unwanted Loops in WDS Bridges LAN Segment Navigating to WDS Settings Security Considerations Related to WDS Bridges Configuring WDS Settings Bridge with Local AddressRemote Address Internal Network WEP Key Example of Configuring a WDS LinkDisabled Local Address Professional Access Point Administrator Guide Navigating to Time Protocol Settings Time Protocol Enabling and Disabling a Network Time Protocol NTP Server NTP Server Professional Access Point Administrator Guide Snmp Understanding Snmp Navigating to Simple Network Management Protocol Allow Snmp SET Requests Enable SnmpRead-only Community Name entire Read-write community name for per Source hostname or subnet Configuring Your Network Management SystemRebooting and Upgrading Your Access Point Using Snmp Ftp//testuser1testuser1@192.168.1.9922/54531.1.23.tar Rebooting Your Access Point Using SnmpUpgrading your Access Point Ftp//192.168.1.100/54531.1.24.tar Professional Access Point Administrator Guide Reboot Reset Configuration Upgrade Professional Access Point Administrator Guide Backup/Restore Navigating to Backup and Restore Settings Backing up Configuration Setting for an Access Point Restoring Access Point Settings to a Previous Configuration Professional Access Point Administrator Guide Command Line Interface Professional Access Point Administrator Guide Basic Settings Yes Described in Backup/Restore on USR5453-AP login Password How to Access the CLI for an Access PointTelnet Connection to the Access Point USR5453-AP login admin Password Enter help for help Status SSH2 Connection to the Access PointTelnet Function Telnet Command Status Down Login as USR5453-AP# SSH Function SSH Command Quick View of Commands and How to Get HelpCommands and Syntax Set ssh Status Get log-entry CommandGet log Get bss wlan0bssInternal Command Description Add radius-user wally Getting Help on Commands at the CLI Remove radius-user wally Command Usage and Configuration Examples Ready to Get Started? Professional Access Point Administrator Guide Wlan0vwn1 Understanding Interfaces as Presented in the CLIInterface Description Vlan1234 Get interface vlan1234 role Saving Configuration ChangesGet interface vlanVLANID role Basic Setting Example Get the MAC Address for an Access Point Get Both the IP Address and MAC Address Wlan0wds1 Wds Down Wlan0wds2 Wlan0wds3 USR5453-AP# Set the Location for an Access Point Get the Firmware Version for the Access PointGet the Location of the Access Point Get the Current Password Get MAC Addresses for all Access Points in the Cluster Access Point and Cluster SettingsCluster Command Example User Accounts USR5453-AP#get radius-user all name name User Account Command ExampleGet All User Accounts Add Users USR5453-AP#set radius-user samantha password westportUSR5453-AP#set radius-user samantha disabled USR5453-AP#add radius-user samantha username samantha USR5453-AP#remove radius-user wally Status Command ExampleRemove a User Account Larry samantha endora darren USR5453-AP#get interface br0 Get Current Settings for the Ethernet Wired Guest Interface Get Current Wireless Radio Settings USR5453-AP# get log-entry USR5453-AP# get radio wlan0 detailGet Status on Events Priority Daemon USR5453-AP#set log relay-enabled USR5453-AP#set log relay-port USR5453-AP#set log relay-hostUSR5453-AP#set log relay-host myserver USR5453-AP# get log Get Client Associations Get neighbouring Access PointsGet Transmit / Receive Statistics USR5453-AP#get detected-ap USR5453-AP# get detected-ap Ethernet Wired Interface Wired Interface Command Example Set Up Guest Access Get Wired Internal Interface SettingsGet Wired Guest Interface Settings Get Summary View of Internal and Guest Interfaces USR5453-AP# get bss USR5453-AP#get interface brguest status downUSR5453-AP#remove bridge-port br0 interface eth0 USR5453-AP#get bridge-port brguest USR5453-AP# get interface brguestUSR5453-AP#get interface brguest status up USR5453-AP#get bridge-port br0 Name Interface USR5453-AP#set dhcp-client status up Get/Change the Connection Type Dhcp or Static IPUSR5453-AP#get dhcp-client status up USR5453-AP#get interface br0 detail USR5453-AP#set interface br0 static-ip Re-Configure Static IP Addressing ValuesUSR5453-AP#get interface br0 static-ip USR5453-AP#get interface br0 static-mask Wireless Interface Security Get Detailed Description of Current Security Settings Security Command ExampleGet the Current Security Mode USR5453-AP#get interface wlan0 security none Enable / Disable Station Isolation Set the Broadcast Ssid Allow or Prohibit Set Security to Static WEP Set Security to NoneUSR5453-AP#set interface wlan0 security none USR5453-AP#set interface wlan0 security static-wep Set bss wlan0bssInternal shared-key-authentication on Set bss wlan0bssInternal open-system-authentication onSet bss wlan0bssInternal shared-key-authentication off USR5453-AP#set interface wlan0 wep-key-ascii yes USR5453-AP#get interface wlan0 detail Radius Option Example Set Security to IeeeUSR5453-AP#set interface wlan0 security dot1x USR5453-AP#set bss wlan0bssInternal radius-ip USR5453-AP#set bss wlan0bssInternal radius-accounting off USR5453-AP#set bss wlan0bssInternal radius-key secretSet Bss USR5453-AP#get interface wlan0 security dot1x WPA Option Example Set Security to WPA/WPA2 Personal PSKUSR5453-AP#set interface wlan0 security wpa-personal Set bss wlan0bssInternal wpa-cipher-ccmp off Cipher Suite Option ExampleSet bss wlan0bssInternal wpa-cipher-tkip on Set bss wlan0bssInternal wpa-cipher-tkip off USR5453-AP#get interface wlan0 security wpa-personal Set Security to WPA/WPA2 Enterprise Radius USR5453-AP#set interface wlan0 security wpa-enterprise Enable Pre-Authentication Cipher Suite Option USR5453-AP#set bss wlan0bssInternal radius-key KeepSecret USR5453-AP#set bss wlan0bssInternal radius-accounting on USR5453-AP#get interface wlan0 security wpa-enterprise Enable/Disable the Guest Welcome Enable/Configure Guest Login WelcomeView Guest Login Settings Set Guest Welcome Page Text Configuring Virtual Wireless Network One on Radio One Configuring Multiple BSSIDs on Virtual Wireless NetworksReview Guest Login Settings Set interface wlan0vwn1 security wpa-enterprise Get Ieee 802.11 Radio Mode Radio SettingsRadio Setting Command Example Creating VWN Two on Radio One with WPA security Get Radio Channel Get Basic Radio SettingsGet All Radio Settings USR5453-AP#get supported-rate Configure Radio SettingsGet Supported Rate Set Get Basic Rate Set USR5453-AP#set bss wlan0bssInternal dtim-period USR5453-AP#set radio wlan0 mode gUSR5453-AP#set radio wlan0 beacon-interval USR5453-AP#get bss wlan0bssInternal dtim-period USR5453-AP#add basic-rate wlan0 rate USR5453-AP#set radio wlan0 fragmentation-thresholdUSR5453-AP#set radio wlan0 rts-threshold USR5453-AP#add supported-rate wlan0 rate MAC Filtering USR5453-AP#get supported-rate wlan0 rate Add MAC Addresses of Client Stations to the Filtering List Specify an Accept or Deny ListSet bss wlan0bssGuest mac-acl-name Guest Get bss interface mac-acl-mode Get Current MAC Filtering SettingsUSR5453-AP#remove mac-acl Guest mac USR5453-AP#get bss wlan0bssGuest mac-acl-mode accept-list Load Balancing Quality of ServiceQoS Command QoS Command Example Enable/Disable Wi-Fi Multimedia Data Access Point Station About Access Point and Station Edca ParametersUnderstanding the Queues for Access Point and Station USR5453-AP#get wme-queue Get QoS Settings on the Access PointGet QoS Settings on the Client Station Set Arbirtation Interframe Spaces Aifs USR5453-AP#set wme-queue wlan0 with queue vo to aifs Setting Minimum and Maximum Contention Windows cwmin, cwmaxSet wme-queue wlan0 with queue QueueName to aifs AIFSValue Set tx-queue wlan0 with queue QueueName to burst burstValue Set the Maximum Burst Length burst on the Access PointUSR5453-AP#set wme-queue wlan0 with queue vi cwmin 7 cwmax USR5453-AP#set tx-queue wlan0 with queue data2 to burst USR5453-AP#set wme-queue wlan0 with queue vo to txop-limit Getting Details on a WDS Configuration Wireless Distribution SystemConfiguring a WDS Link USR5453-AP#set interface wlan0wds0 remote-mac 00E0B8761B14 USR5453-AP#get ntp detail Time ProtocolSet ntp server ntp.instant802.com USR5453-AP#factory-reset Reboot the Access PointReset the Access Point to Factory Defaults Keyboard Shortcuts and Tab Completion Help Action on CLI Keyboard Shortcut Keyboard ShortcutsTab Completion and Help USR5453-AP#get system v USR5453-AP#get system version CLI Class and Field Overview USR5453-AP# set mac-acl Field Reference on Has name? \ # of instances? One Multiple CLI Class Relationships Class Description Class IndexAssociation Interface AuthenticatedField Index Station Basic-rate Bridge-port Priority BssPath-cost Radio StatusDescription Beacon-interface Max-stations MacDtim-period Ignore-broadcast-ssid Cluster Open-system-authenticationChannel-planner Cluster-member No-external-updates ConfigDefault Debug Detected-ap Field Description Beacon-interval Capability Type Beacons Dhcp-clientErp Last-beacon Debug Dot11Host Dot11d Static-dns-12 Dns-12Domain Static-domain Interface Mask Static-ip Rx-errorsType Static-mask Rx-multicast Tx-errorsRx-compressed Tx-packets Ip-route Log JvmKickstartd Gateway Number Log-entryDepth Time Message Mac-aclNtp Server Welcome-screen-text PortalWelcome-screen Max-bss Channel-policy Tx-powerMax-bss Mode Fragmentation-threshold WmewifinoacktestRts-threshold Load-balance-disassociation-utilization Snmp Radius-userSerial Ro-community System SshSupported-rate Rw-community Password-initialized PasswordEncrypted-password Telnet Queue Tx-queueCommunity Web-ui Wme-queue Professional Access Point Detection Utility does not find Possible Solution Access point Cannot access the Web User Interface My wireless device cannot find the wireless network Possible Solution Wireless Distribution System WDS Problems and Solutions Am experiencing poor wireless link quality Cluster Recovery Reboot or Reset Access Point Stop Clustering and Reset Each Access Point in the Cluster Click Stop Clustering Professional Access Point Administrator Guide Support Information Country Webmail Voice UAE FCC Radiation Exposure Statement Declaration of ConformityDetachable Antenna Information Radio and Television Interference UL Listing/CUL Listing For Canadian UsersIndustry Canada IC CE Compliance Declaration of Conformity EU Detachable Antenna Information Regulatory Channel FrequencyEU Health Protection Professional Access Point Administrator Guide Professional Access Point Administrator Guide Robotics Corporation Two 2 Year Limited Warranty Obtaining Warranty Service Limitations Disclaimer 802.2 802802.1x 802.3 802.11e 802.11b802.11d 802.11f AES Broadcast BeaconBridge Broadcast Address CGI BssidCcmp CSMA/CA DNS DCFDhcp DOM ESS EAPEdcf Ethernet Html FrameGateway Http Ieee Infrastructure ModeIbss Intrusion Detection Jitter IPSecISP Latency LLC LANLdap MAC NTP NATNIC OSI PHY PacketPacket Loss PID PPP PSK Rssi RadiusRC4 RTP STP SnmpSsid TCP/IP Supported Rate SetTCP Tkip URL UDPUnicast Vlan WEP WANWDS Wins Wrap WMM WPAWPA2 XML Index DCF Ieee Snmp WDS Index-328