![](/images/new-backgrounds/1187102/187102101x1.webp)
Professional Access Point
Administrator Guide
For a standalone access point, this is the only way to navigate to the configuration information.
If you do not know the IP address for a standalone access point, use the Detection Utility to find all APs on the network and you should be able to derive which ones are standalone by comparing the Detection Utility findings with access points listed on the Cluster menu’s Access Points page. The APs that the Detection Utility finds that are not shown on the Access Points page are probably standalone APs. (For more information on using the Detection Utility, see “Step 3. Run the Detection Utility to find access points on the network” on page 26.)
Access Points - 51