Professional Access Point
Administrator Guide
•Radio settings
The following radio settings are synchronized across clusters:
•Mode
•Channel
Note
When Channel Planning is enabled, the radio Channel is not synchronized across the cluster. See “Stopping/Starting Automatic Channel Assignment” on page 66.
•Fragmentation Threshold
•RTS Threshold
•Rate Sets
The following radio settings are not synchronized across clusters:
•Beacon Interval
•DTIM Period
•Maximum Stations
•Transmit Power
•Security settings
•QoS queue parameters
•MAC address filtering
Settings Not Shared by the Cluster
The few exceptions (settings not shared among clustered access points) are the following; most of these, by their nature, must be unique:
•IP addresses
•MAC addresses
•Location descriptions
•Load Balancing settings
•WDS bridges
•Ethernet (Wired) Settings, including enabling or disabling Guest VLAN access
•Guest VLAN interface configuration
Settings that are not shared must be configured individually in the Web User Interface for each access
Access Points - 46
