Page 180 of 378 Install and configure ITG ISL Trunk node
553-3001-202 Standard 1.00 April 2000
MODE ISLD Mode of Operation.
Route uses ISDN Signaling Link in dedicated
mode.
Note:
ISLD is allowed when ISDN = YES and the ISL
package 147 is equipped. ISLD is allowed only on ISA
and TIE trunks.
DCH xxx D-channel number, where:
x = 0-255 for Large Systems.
x = 0-79 for Small Systems.
IFC SL1
ESGF
ISGF
Meridian Customer Defined Network (MCDN) is
required for Small Systems.
ESIG interface with GF platform (QSIG)
ISIG interface with G F platform (QSIG)
The IFC of the route data block must match the
IFC of the ISL D-Channel in the configuration
record
PNI (0) - 32700 Private Network Identifier. You must configure the
PNI to 1 or other non-zero value to support
Meridian Customer Defined Network (MCDN)
features that use non-call-associated signaling.
For example, Network Ring Again (NRAG)
Network Message Services (NMS), Network ACD
(NACD). Each feature needs ISDN signal ing to be
sent across the Meridian 1 network in the absence
of a call.
Note:
The PNI in the custom er data block must be the
same as the PNI config ur e d in t h e rou t e d ata b l ock at the
far end for outgoing calls f rom the far-end toward thi s
Meridian 1 node.
NCNA (YES) NO Network calling name allowed
NCRD (NO) YES Network Call Redirection allowed
Table 34
LD 16 - Configure the ITG ISL TIE Trunk route data block (Part2 of 4)
Prompt Response Description