Page 206 of 378 Install and configure ITG ISL Trunk node
553-3001-202 Standard 1.00 April 2000
3Enter the Radius accounting server IP address. Add the same
Accounting Server IP address configured in the Card Routing Table
entries as discussed in “Configure SNMP Traps/Routing and IPs t ab”
on page 204.
4Change the default port number from the default (1813), if required.
5Enter the key. The key is a signature for authentication of the Radius
records. It can be a maximum of 64 alphanumeric characters.
6Click Apply.
Figure 34
ITG Node Properties window - Accounting Server tab