321 Studios (ITG) Trunk 2.0 - page 283

OA&M using the ITG shell CLI and overlays Page 283 of 378
ITG Trunk 2.0 ISDN Signaling Link (ISL) Description, Installation and Operation
Software upgrade
Use this command in the procedure “Transmit new software to ITG Tr u n k
cards” on page 227.
• swDownload "hostname","username","password",
"directory path","filename"
Generic file transfer:
Use these commands for debug purposes. The first five parameters refer to the
FTP host. The "ITGFileName" parameter refers to the directory path and fil e
name on the ITG card. The "listener" parameter in the ’hostFileGet’
command identifies a software module to be c alled to pa rse the fil e after i t has
been correctly transferred to the ITG card. To avoid damaging the
configuration files and ITG card, only use the ’hostFileGet’ command under
the direction of Nortel Networks support personnel .
• hostFileGet "hostname","username","password" ,
"directory path","filename","ITGFileName","listener"
• hostFilePut "hostname","username","password",
"directory path","filename","ITGFileName"
Configuration file transfer
Use these commands to backup and restore files when the preferred means,
the MAT ITG PC , is not availab le.
• DPAddrTGet "hostname","username","password",
"directory path","filename"
• DPAddrT P ut "hos tname","username","password",
"directory path","filename"
• configFileGet "hostname","username","password",
"directory path","filename"
• configFilePut "hostname","username","password",
"directory path","filename"
• bootPFileGet "hostname","username","password" ,
"directory path","filename"