Install and configure ITG ISL Trunk node Page 183 of 378
ITG Trunk 2.0 ISDN Signaling Link (ISL) Description, Installation and Operation
TN l s c u
c u
Terminal Number for l arge systems, where:
l = loop, s = shelf, c = card, u = unit.
Terminal Number for Small Systems, where:
c = card, u = unit.
Always perform the NEW XX for unit 0 on the ITG
ISL Trunk card.
DES
hhhh:hh:hh:hh:hh
xxx.xxx.xxx.xxx
16 character descriptive designator for the ITG
card.
See Note 1.
For unit 0. the ITG card management MAC
address.
For units 1-23 the ITG card management IP
address.
XTRK ITG2 Extended Trunk Type: ITG Trunk card (2-slot
assembly).
MAXU XX Maximum number of ports on this ITG card, where
xx = 24 for the NT0961AA 24-port ITG Trunk card,
xx= 8 for the NTCW80 8-port ITG Trunk card.
...
CUST xx Customer Number, as defined in LD 15.
RTMB 0-127 1-254 Route number and Member number.
Assign route member numbers to cards in the
same order as the default order in the MAT ITG
ISDN IP Trunks window.
The trunk route member number matches the
standard First CHID for the trunk unit 0 in order to
facilitate administration and mai ntenance.
Table 35
LD 14 - Configure ITG ISL 8- or 24-port trunk cards and units (Part2 of 3)
Prompt Response Description