OA&M using MAT applications Page 265 of 378
ITG Trunk 2.0 ISDN Signaling Link (ISL) Description, Installation and Operation
4In the Retrieve ITG node window, select the MAT Site, and Meridian
1 System fields. Select th e Meridian 1 Customer number.
Note:
The site name, Meridian1 system name, and Meridian 1
customer number must exist in the MAT Navigator before you can add
a new ITG node.
5Enter the management IP address field for Leader 0 or Leader1 on the
existing node.
6Enter the SNMP read/write community name. The default is “private”.
7Click the Start Retrieve button.
The Retrieve control dialog box displays the results of the retrieval.
The node properties, card properties and dialing plan are retrieved
from the Leader card.
8Click Close when the download is complete.
9Refresh the card status from the View menu, and chec k t hat the cards
in the new node are responding.
Retrieve and add an ITG ISL Trunk Node for maintenanceand diagnostic purposesUse this procedure to create a “dummy” ITG node for retrie ving a nd vi ewing
the real ITG node configuration, without over - writing the existing ITG
configuration data for an existing node in the MAT ITG dat abase. Retri evi ng
the real ITG node configuration to the “dummy” node is useful in the
following cases:
• Isolating ITG node configuration faults
• Determining which copy of the database is correct, so that you can
determine the required direction of database synchronization:
– transmit MAT ITG to ITG node, or
– retrieve ITG node to MAT ITG node.
You can add the dummy node manually or by retrieving the ITG node
configuration data from an existing node.
The site name, Meridian 1 system name, and Meridian 1 customer number
must exist in the MAT Navigator before you can add a new ITG node.