OA&M using the ITG shell CLI and overlays Page 287 of 378
ITG Trunk 2.0 ISDN Signaling Link (ISL) Description, Installation and Operation
Backup and restore from the ITG command line interface
This procedure can be used when the preferred m ethod, using the MAT ITG
PC, is not available. This whole procedure must be performed when a
configuration file has been changed.
You must first use the ‘Put’ commands to back up the ITG card configurat ion
files. You can later restore the files using the ’Get’ commands.
However, you can use the "DPAddrTGet" file to restore the Dialing Plan file
from another ITG card in the same node.
Backup from the ITG command line interface
1Identify an appropriate FTP host and get the IP address, the user
name, the password, and a directory path on the host.
2Log in to the ITG shell of the Leader 0 ITG card of the ITG node.
3Use the BootPFilePut command with the appropriate parameters, to
backup the Node Properties file to the FTP host.
4Use the DPAddrPut command with the appropriate parameters, to
backup the Dialing Plan file to the FTP host.
5For each ITG card, log in to the ITG shell and use the configFilePut
command to backup the card properties f iles. Each f ile must be named
to identify the card it goes with.
Restore from the ITG command line interface
To restore configuration when the MAT ITG PC is not av ailable to re transmit
the ITG configuration data, use the appropriate ’Put’ commands:
1Use the BootPFileGet command with the appropriate parameters, to
restore the Node Properties file from the FTP host to the ITG card.
2Login to the ITG shell for each c ard that requir es a Dial ing Pl an restor e.
Use the DPAddrPut command with the appropriate parameters, to
backup the Dialing Plan file from the FTP host, or from another ITG
card in the node that has a valid copy of the Dial ing Plan, to ea ch card.
Each card requires a valid copy of the Dialing Plan.