Maintenance Page 315 of 378
ITG Trunk 2.0 ISDN Signaling Link (ISL) Description, Installation and Operation
Table 53
DSP commands
Command Description
DSPReset DSP Number Reset the indicated DSP.
Example:
ITG>DSPReset 0
DSPSelfTest DSP Number Run self-test on the DSP.
Example:
ITG>DSPSelfTest 0
DSPNumShow Print number of DSPs on ITG card.
Example:
ITG>DSPNumShow
DSPPcmLpbkTestOn Start PCM loopback test on the indicated DSP.
Example:
ITG>DSPPcmLpbkTestOn
DSPPcmLpbkTestOff Stop PCM loopback test on the indicated DSP.
Example:
ITG> DSPPcmLpbkTestOff
DSPSndLpbkTestOn Start Send loopback test on the indicated DSP.
Example:
ITG> DSPSndLpbkTestOn
DSPSndLpbkTestOff Stop Send loopback test on the indicated DSP.
Example:
ITG> DSPSndLpbkTestOff
DSPRcvLpbkTestOn Start Receive loopback test on the indicated DSP.
Example:
ITG> DSPRcvLpbkTestOn
DSPRcvLpbkTestOff Stop Receive loopback test on the indicated DSP.
Example:
ITG> DSPRcvLpbkTestOff