Install and configure ITG ISL Trunk node Page 233 of 378
ITG Trunk 2.0 ISDN Signaling Link (ISL) Description, Installation and Operation
6For each ITG Trunk card in each monitored ITG Tr unk node, add a line
consisting of three fields separated by spaces. Enter the first line
beginning underneath the last line that begins with a "#"., Lines
beginning with “#” are comments and not processed. Do not begi n any
of the lines defining ITG devices with “#”.
7Click File | Save.
8In the Alarm Notific ation Run Options w indow, click OK.
MAT Alarm Notification must be restarted whenever Control Files are
changed.
Figure 42
Devices.txt file
Table 40
Format of Devices.txt file
Device Type IP Address Device Name
ITG xxx.xxx.xxx.xxx Site_Leader_0
ITG xxx.xxx.xxx.xxx Site_Leader_1
ITG xxx.xxx.xxx.xxx Site_Follower_2
Note:
The Device Name cannot contain any spaces. Us e a descriptive name f or
the Meridian 1 site where the ITG Trunk node is loc ated.