OA&M using MAT applications Page 259 of 378
ITG Trunk 2.0 ISDN Signaling Link (ISL) Description, Installation and Operation
Transmit configuration data
MAT converts the ITG node and card configuration data to text files , and
transmits the files to the I TG cards usin g FTP. The te xt file s are the followin g:
• Nod e prope rties: bootptab.txt (only transmitted to the Active Leader)
• Dialing plan: dialplan (transmitted to ev er y car d )
• Card properties: CONFIG.INI (transmitted to every card)
The bootp table is downloaded to the Leader card and copied to the Backup
Leader. All other ITG cards in the node use bootp t o retrieve th eir boot up data
from this table. MAT downloads the config.ini file to each card. It also
downloads the dialplan f ile to each card.
The ITG Main window displays the synchronization status of each of these
fields. Changes to the first two tabs (General and Card Configuration) in the
Node Properties shee t affect the Node Sync hronization Status. Ch anges to the
other tabs (DSP Profile, SNMP Trap / Routing table IPs, Accounting Server,
and Security) in the Node Properties sheet affect the Card Synchronization
Status. You must transmit these changes to each card in the node.
Select the “Configuration” pull-down menu in the Main IT G window. From
this menu, select menu Synchronize | Transmit. The ITG Transmit Opti ons
window appears (see Figure52). This window allows you to transmit
multiple files to one or more ITG cards.
Private CDP DSC
TSC
Private Unknown SPN
DSC
TSC
LOC
Unknown Unknown SPN
DSC
TSC
LOC
Table 41
Mapping of dialing plan with TON and NPI
NPI TON Dialing Plan