Install and configure ITG ISL Trunk node Page 225 of 378
ITG Trunk 2.0 ISDN Signaling Link (ISL) Description, Installation and Operation
Check card software
In this procedure, you check the software version of the cards in a new node.
All cards must have same version. To ensure proper ITG ISL trunk network
operation, Nortel Networks recommends that all network nodes have the
same software version. Verify the software release from ea ch card is t he latest
recommended software release for ITG ISL Trunk by connecting to a Nortel
Networks website that contains the latest software versions for the NT0961
24-port card the NTCW80 eight-port card.
1From the IP Tel ephony Gate wa y - ISDN IP Trunk Main window, click on
the new node.
2For each card in the node, starting with Leader 0, double-cl ick on the
card entry in the lower half of the window . The Card Pro perties window
appears.
3Click Configuration tab and record S/W version, card density and
TN for each card in the new node (see Figure40).
Figure 40
Properties configuration tab