Description Page 65 of 378
ITG Trunk 2.0 ISDN Signaling Link (ISL) Description, Installation and Operation
• Destination IP address and port (of the actual card handling the call, not
the remote Leader),
• Call start time,
• Call duration (time from call initia ti o n to ca ll answer),
• Codec used,
• Orig/Term call side indication,
• Sna ps hot of remote Gateway’s QoS at time of call connect.
The calling and called numbers (with their corresponding IP addresses) are
just that, regardless of which end is doing the originatin g. So the Follower
card on the originating side generates a RADIUS record with its own IP
address as the ori ginating IP addr ess. The termina ting Follower al so
generates a RADIUS record with that far end’s IP address as th e originating
IP address and it’s own IP address as the destination address.
If the call is not answered or is rejected, only an End record is generated.
End Record
The End record is s ent when the call is released. It c ontains the followi ng
fields:
• Calling party number,
• Originating IP address and port,
• Called party number,
• Destination IP address and port (of the actual card handling the call, not
the remote Leader),
• Call start time,
• Call durat ion (time from call answer to call release),
• Codec used,
• Orig/Term call side indication,
• Number of bytes transferred (sent octets/packets)
• Number of packets transferred (sent octets/packets)
• Snapshot of latency seen at the end of the call