Page 254 of 378 OA&M using MAT applications
553-3001-202 Standard 1.00 April 2000
Add Dialing Plan entries
The dialing plan provides translation between the dial ed digits and the IP
address of the remote ITG node. Right click on any card in the node and select
menu Node | Node Dialing Plan. The ITG Dialing Plan windo w appe ars (see
Figure 49).
There is one dialing plan for each ITG node in the network; it is transmitted
to each card. When the dialing plan is changed, dial plan synchroniza tion
status is set to “Changed” for each card in the node. The card does not have
to be disabled.
You can view the dialing plan data s orted by digits dialed. select menu View
| Digits Dialed. To return to the remote node view, select menu View |
Remote Nodes.
The following comments apply to the ITG Dialing Plan windows:
• The Node name is derived from the Node Properties if the node is
defined on this MAT PC. If not, the Node name entered in the property
sheet is displayed.
• If there are many digit strings in a column, the fir st five appear in t he list
followed by dots. To see all strings, you must open the property sheet.
• The Qua lity of Service column has the following two parts:
Figure 49
Dialing Plan - Remote Node view