Page 184 of 378 Install and configure ITG ISL Trunk node
553-3001-202 Standard 1.00 April 2000
CHID xxx First Channel ID for unit 0 on this ITG card, where:
xxx =
1-259 for the NT0961AA 24-port ITG Trunk card
1-375 for the NTCW80 8-port ITG Trunk card
Standard First CHID Configuration (24 and 8 Port):
Leader 0 -- 1
Leader 1 -- 25
Follower -- 49
Follower -- 73
Follower -- 97
Follower -- 121
...
The same First CHID must be entered in MAT ITG
ISDN IP Trunk Node Properties, Card
Configuration, and “First CHID” field for this car d.
The standard First CHID matches the trunk route
member number for the trunk unit 0 in order to
facilitate administration and mai ntenance.
...
STRI WNK Start Arrangement Incoming.
Wink Start is preferred for ITG Trunk.
STRO WNK Start Arrangement Outgoing.
Wink Start is preferred for ITG Trunk.
SUPN YES Answer supervision is required.
...
CLS DIP Class of Ser vice.
Dial Pulse is required for ITG ISL Trunk to avoid
busying multiple Digitone receivers when ITG
Trunk card fa ults occur.
...
Table 35
LD 14 - Configure ITG ISL 8- or 24-port trunk cards and units (Part3 of 3)
Prompt Response Description