Delta Electronics none manual CM2, CM3, CM4, CM5

P0 - 05

		Chapter 7 Servo ParametersASDA-AB Series
CM2	Status Monitor 2		Communication Addr.: 0005H
Default: 0			Related Section:
Applicable Control Mode: ALL			Section 4.3.5
Unit: N/A

Range: 0 ~ 16

Settings: See P0-04 for explanation.

P0 - 06

CM3	Status Monitor 3	Communication Addr.: 0006H
Default: 0		Related Section:
Applicable Control Mode: ALL		Section 4.3.5
Unit: N/A

Range: 0 ~ 16

Settings: See P0-04 for explanation.

P0 - 07

CM4	Status Monitor 4	Communication Addr.: 0007H
Default: 0		Related Section:
Applicable Control Mode: ALL		Section 4.3.5
Unit: N/A

Range: 0 ~ 17

Settings:

Select the desired drive status through communication setting or the keypad (please refer to P0- 02). The drive status can be read from the communication address of this parameter via communication port. If users set this parameter to 17, the status of DI signal can be read.

P0 - 08

CM5	Status Monitor 5	Communication Addr.: 0008H
Default: 0		Related Section:
Applicable Control Mode: ALL		Section 4.3.5
Unit: N/A

Range: 0 ~ 17

Settings:

Select the desired drive status through communication setting or the keypad (please refer to P0- 02). The drive status can be read from the communication address of this parameter via communication port. If users set this parameter to 17, the status of DO signal can be read.

Revision March 2008, Doc. Name: 2007PDD23000011 7-23