Delta Electronics none manual SOF2, TOF1, TOF2, COF1

P4 - 12

Chapter 7 Servo ParametersASDA-AB Series

SOF2	Analog Speed Input Drift Adjustment 2	Communication Addr.: 040CH
Default: Factory setting		Related Section: N/A
Applicable Control Mode: ALL
Unit: N/A

Range: 0~32767

Settings:

Please see P4-11 for explanation.

P4 - 13

TOF1	Analog Torque Drift Adjustment 1	Communication Addr.: 040DH
Default: Factory setting		Related Section: N/A
Applicable Control Mode: ALL
Unit: N/A

Range: 0~32767

Settings:

This adjustment function is enabled after parameter P2-08 is set to 22. This is an auxiliary adjusting function, although this parameter allows the users can execute manual adjustment, we still do not recommend the users to change the default setting manually.

This parameter cannot be reset.

P4 - 14

TOF2	Analog Torque Drift Adjustment 2	Communication Addr.: 040EH
Default: Factory setting		Related Section: N/A
Applicable Control Mode: ALL
Unit: N/A

Range: 0~32767

Settings:

Please see P4-13 for explanation.

P4 - 15

COF1	Current Detector Drift Adjustment (V1 phase)	Communication Addr.: 040FH
Default: Factory setting		Related Section: N/A
Applicable Control Mode: ALL
Unit: N/A

Range: 0~32767

Settings:

This adjustment function is enabled after parameter P2-08 is set to 22. This is an auxiliary adjusting function, although this parameter allows the users can execute manual adjustment, we still do not recommend the users to change the default setting manually.

This parameter cannot be reset.

Revision March 2008, Doc. Name: 2007PDD23000011 7-85