Delta Electronics none manual DI1, Digital Input Terminal 2 DI2 Communication Addr BH, DI3

P2 - 10

		Chapter 7 Servo ParametersASDA-AB Series
DI1	Digital Input Terminal 1 (DI1)		Communication Addr.: 020AH
Default: 101			Related Section:
Applicable Control Mode: ALL			Table 7.A
Unit: N/A
Range: 0 ~ 147

Settings:

This parameter is used to determine the function and status of DI1.

A

B

not used

•A: DI Function Settings: For the setting value of P2- 10 ~ P2-17, please refer to Table 7.A.

•B: DI Enabled Status Settings:

0:Normally closed (contact b)

1:Normally open (contact a)

Please re-start the servo drive after parameters have been changed.

P2 - 11

DI2	Digital Input Terminal 2 (DI2)	Communication Addr.: 020BH
Default: 104		Related Section:
Applicable Control Mode: ALL		Table 7.A
Unit: N/A

Range: 0 ~ 147

Settings: See P2-10 for explanation.

P2 - 12

DI3	Digital Input Terminal 3 (DI3)	Communication Addr.: 020CH
Default: 116		Related Section:
Applicable Control Mode: ALL		Table 7.A
Unit: N/A

Range: 0 ~ 147

Settings: See P2-10 for explanation.

Revision March 2008, Doc. Name: 2007PDD23000011 7-55