Delta Electronics none manual Display and OperationASDA-AB Series

Chapter 4 Display and OperationASDA-AB Series

P0-02	Display Message	Description	Unit
Setting
9		Torque input command	Volt
10		Torque input command	%
11		Average load	%
12		Peak load	%
13		Main circuit voltage	Volt
14		Ratio of load inertia to motor inertia	time
15		Motor feedback pulse number (relative	pulse
		value) / Position latch pulse number
16		Motor feedback rotation number (relative	rev
		value) / Position latch rotation number

The following table lists the display examples of monitor value:

Display Message	Description
	Positive value display. No positive sign is displayed to indicate
	it is a positive value.
	Display value: +1234.
	Negative value display (The decimal place is less than five).
	The negative sign is displayed to indicate it is a negative value.
	Display value: -1234.
	Negative value display (The decimal place is greater than four).
	The lit decimal points are used to indicate it is a negative value.
	Display value: -12345.
	Decimal value display.
	Display value: 12.34.

Revision March 2008, Doc. Name: 2007PDD23000011 4-5