Delta Electronics none manual MAP0, MAP1, MAP2, MAP3

Chapter 7 Servo ParametersASDA-AB Series

P0 - 09	MAP0	Block Data Read / Write Register 0	Communication Addr.: 0009H
	Default: 407H		Related Section: N/A
	Applicable Control Mode: ALL
	Unit: N/A
	Range: 100H ~ 417H
	Settings:

Set the register address in HEX that users want to read and write by using the keypad.

Users can enter the desired register address (0100H ~ 0417H) into P0-09 to P0-16 (0009H ~ 0010H). Then, users can read and write up to 8 continuous specified block data from the communication address 0009H to 0010H through the communication port.

For example, if setting P0-09 to 407 by using the keypad, when the users read and write the data from communication address 0009H, it means that the read and write value is the setting value of parameter P4-07.

P0 - 10

MAP1	Block Data Read / Write Register 1	Communication Addr.: 000AH
Default: 10FH		Related Section: N/A
Applicable Control Mode: ALL
Unit: N/A
Range: 100H ~ 417H
Settings: See P0-09 for explanation.

P0 - 11

MAP2	Block Data Read / Write Register 2	Communication Addr.: 000BH
Default: 110H		Related Section: N/A
Applicable Control Mode: ALL
Unit: N/A
Range: 100H ~ 417H
Settings: See P0-09 for explanation.

P0 - 12

MAP3	Block Data Read / Write Register 3	Communication Addr.: 000CH
Default: 224H		Related Section: N/A
Applicable Control Mode: ALL
Unit: N/A
Range: 100H ~ 417H
Settings: See P0-09 for explanation.

7-24 Revision March 2008, Doc. Name: 2007PDD23000011