4.6.6 Setting the Time to Standby Mode

The scanner can be set to automatically log out and then enter a standby state after specified periods of non-use.

For any screen after regular user login, if no operations have been performed for the specified "Logout after" period of time, the scanner automatically logs the user out.

HINT

The scanner will not logout while the following operations are ongoing:

zScanning documents

ze-Mailing a scan

zFaxing a scan

zPrinting a scan

zSaving a scan

When logged in as a regular user, if no operations are performed for the specified "Standby after" period of time, the scanner enters standby mode. The touch panel is switched off when the scanner enters standby mode.

When the startup button is pressed, the scanners will startup from standby mode.

The screen displayed after a re-startup varies according automatic login settings in the following way:

zIf automatic login is enabled, the operation screen is displayed.

However, if "Never" is specified for "Standby after", and automatic login is disabled for the currently logged in user, the login screen is displayed.

zIf automatic login is disabled, the login screen in displayed.

For screen transmissions, refer to "2.2.1 Using the Startup Button" (page 26).

66