ATTENTION
Multifeed may not be detected for the top and bottom 25mm of a doc- ument.
4.In Step 3, if [Middle] or [Top & Bottom] is selected, enter both "#1" (upper limit) and "#2" (lower limit).
#1: Even numbers from 0 to 508mm can be entered. Odd numbers will be made even by adding one.
#2: Even numbers from 0 to 510mm can be entered. Odd numbers will be made even by adding one.
ATTENTION
zFor multifeed detection, a length of at least 5mm is required. Specify a value for #2 that is at least 6mm greater than that for #1.
z"#2" can have a maximum value of 510mm. If the paper size setting is long page mode but the length of the document is longer than 510mm, multifeed cannot be detected by length.
zWhen [Middle] is selected, if the document is shorter than "#1", multi- feed will not be detected. When [Top & Bottom] is selected, if the document is shorter than "#2", multifeed will not be detected for the bottom part.
zIf the values specified for "#1" and "#2" exceed the actual paper size, multifeeds will not be detected.
5. Press the [OK] button.
The document area to be monitored for multifeeds is set.
80