4.7 Using the Network Settings Menus
4.7.13 Setting the Network PrintersSet a printer connected to the network.
The procedure for setting a network printer is as follows.
1. Check the printer driver.
For more details, refer to "Checking the Printer Drivers" (page 120).
2. Set the printer properties.
For more details, refer to "Setting the Printer Properties" (page 121).
3. Register the network printer.
Up to 100 network printers can be registered.
A network printer can be registered in one of the following ways.
z Network Tree |
|
Select a network printer from the network tree. |
|
For more details, refer to "Registering a Network Printer (Network Tree)" (page 124). |
|
z Network Path | 4 |
Directly enter the network printer path name. | |
For more details, refer to "Registering a Network Printer (Network Path)" (page 127). |
ATTENTION
zBe sure to read the printer manual beforehand for information about setting a printer, adding a network printer, and other cautions.
zIf the drive on which the spool folder for the print server exists does not have enough free space, printing will stop. Make sure that there is enough space in the drive before printing.
zDo not set a virtual printer.
zIf a printer connected to different print servers is to be registered as a net- work printer multiple times, the software version of the driver should be the same on each print server. If the software version of the printer driver dif- fers, printing errors may occur.
| 119 | |
| ||
|
|
|