ATTENTION
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| A |
Take the following precautions when scanning plastic cards (for | ||||||||||||||||||||||||||||||||||||||||||||||
example ID cards). | ||||||||||||||||||||||||||||||||||||||||||||||
z In Scan Settings, set the Multifeed Setup to [None]. For more details | ||||||||||||||||||||||||||||||||||||||||||||||
|
| about Multifeed Setup, refer to "6.9.17 Multifeed Detection (Layer |
| |||||||||||||||||||||||||||||||||||||||||||
| ||||||||||||||||||||||||||||||||||||||||||||||
|
|
| ||||||||||||||||||||||||||||||||||||||||||||
z Place one card at a time into the ADF paper chute. |
| |||||||||||||||||||||||||||||||||||||||||||||
z Cards must be fed through the ADF in portrait mode, as in the fol- |
| |||||||||||||||||||||||||||||||||||||||||||||
|
| lowing figure. |
| |||||||||||||||||||||||||||||||||||||||||||
Back | side |
PORTRAIT
LANDSCAPE
zCards should be placed face down in the ADF paper chute.
zEmbossed cards should be placed with the raised lettering side down.
zCards should be of the following specifications:
Width × Length: 2.1 × 3.4 in / 54 × 86 mm
Thickness: 0.03 ±0.003 in / 0.76 ±0.08 mm
Material: PVC (polyvinyl chloride) or PVCA (polyvinyl chloride ace- tate)
zCards that are excessively stiff may not be fed smoothly by the ADF.
zCards that have become dirty from handling should be wiped clean before scanning.
| 481 | |
| ||
|
|
|