5.10 Installing an Add-in

■Upload & Release a New Add-in

Uploads a new Add-in module and issues an update call as needed.

The new Add-in update module will be released, and applied to the scanners when the one of the following occurs:

zScanner is started, or resumed from the standby mode

zScanner is logged out

zScanner is notified of any update modules

zScanner has an automatic update scheduled

Updates can be applied to the scanners that are in power-off or standby mode using Wake-On- LAN.

If the Add-in module is already available, the module is replaced. However, if the date of the last modified Add-in module version is the same as, or earlier than the currently available one, the module cannot be uploaded.

z Upload an Add-in Module for the Add-in Group selected above.

 

Select the [Browse] button to specify the install module file.

 

Select the [Upload] button to upload the Add-in module.

 

z Issue an Update Call

 

Check the checkbox to issue an update call.

 

When the checkbox is selected, even if a scanner is not started or logged in to, the update

 

module is sent and applied to the scanner according to the Scanner Notification Schedule.

 

However, if the update is released while logged in to a scanner, the update will be applied

 

after logged out. If any other available updates are pending, those are also applied at the

 

same time.

5

z Scanner Notification Schedule

Sets the schedule to notify Add-in module.

zNow

Issues a call immediately.

zLater

Specifies the date and time to issue a call.

The default value is 00:00 of the following day. The value can be specified within the range between the current time and a month later.

Update call schedule uses the Central Admin Server timezone.

ATTENTION

When issuing a call, set a time that does not conflict with that set for "Software Update Time-Period Restrictions" on the "Central Admin Server Settings" window.

fi-6010N Network Scanner Operator's Guide

 

269