4.6 Using the System Settings Menus
3. Set the area for multifeed detection in the "Multifeed Detection" section.
Starting from the top edge of a document sheet, set the area to be checked for multifeeds.
Full | Multifeeds will be detected within 17.5mm from either side of the cen- | |
| ter of paper. |
|
Middle | Multifeeds will be detected within "#1" (upper limit) and "#2" (lower | |
| limit) set. (a) |
|
|
| 17.5mm 17.5mm |
|
| #1 |
|
| #2 |
| Up to 510mm | (a) |
4
Outside of multifeed detection area
Center of paper
Top & Bot- | Multifeeds will be detected from the top of the page to "#1" (upper | |
tom | limit), and from #2 (lower limit) to the bottom of the page. (b) | |
| 17.5mm 17.5mm |
|
| (b) | #1 |
#2
Up to 510mm
(b)
Outside of multifeed detection area
Center of paper
79 |