4.6 Using the System Settings Menus

6.Press the [Now] button.

The system is restarted.

HINT

zIf the new scanner name is the same as another device name already in use on the network, communication problems will occur. In this case, try the following steps:

1.Disconnect the LAN cable, and press the [Shutdown] button on the touch panel to turn the scanner off.

2.Reboot the scanner with the LAN cable disconnected, and enter a non-duplicate scanner name.

3.Reboot the scanner again.

4.Re-connect the LAN cable to the scanner.

zThe connection will be lost if the scanner name is changed via the network interface. To continue with other settings, wait a short time for the device to restart, then login to the network interface again.

4

fi-6010N Network Scanner Operator's Guide

 

61