4.7.11 Setting the e-Mail Server (SMTP Server)

ATTENTION

e-Mail cannot be sent if authentication is required by the e-mail server before sending.

1.Select the [Network Settings] tab on the top menu.

2.Select the [SMTP Server] tab on the left side menu.

The "SMTP Server" screen appears.

3.Enter the SMTP server IP address, host name, or FQDN in the "Address" input field. z For an IP address

The following format should be used xxx.xxx.xxx.xxx (xxx is a value from 0 to 255).

z For a host name or FQDN

This may be up to 255 characters long.

If an SMTP server is not required, leave this field blank.

4.Enter a port number from 1 to 65535, to be used by the scanner to communicate with the SMTP Server.

The default setting is 25.

116