4.7 Using the Network Settings Menus

5.At "Split Mails", set whether to send split e-mails.

The default setting is [Off].

Press the [On] button to send split e-mails.

Press the [Off] button to send an e-mail without splitting it.

6.For "Segment Size", set a value from 64 to 10240 as the maximum size for splitting an e-mail.

The default size is "256 KB".

7.Set the "Maximum Attachment Size" for e-mails (total data size when sending an e- mail). This may be between 1 and 20 MB.

The default size is "10MB".

ATTENTION

Set this value so as not to exceed the value of the message size restriction set in the SMTP server.

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

8. For "Address Warning Limit", set a value from 2 and 1000 as the maximum number of

4

addresses to which e-mail can be sent without confirmation. If the number of recipient

addresses specified for an e-mail is then larger than this value, a warning dialog will

 

be shown to prevent inadvertent transmission of a mass e-mailing.

 

The default value is "100".

9.Press the [OK] button.

The SMTP server is set.

fi-6010N Network Scanner Operator's Guide

 

117