4.10 Using the Maintenance Menus
ATTENTION
Do not change the contents of system settings backup files.
If changed, the file may no longer be used as a backup. Trying to restore from a changed system settings backup file may render the scanner inoperable.
The system settings backup file can be returned to the scanner to restore system settings to those at the time backup was taken.
1.Select the [Maintenance] tab on the top menu.
2.Select the [System Settings File] tab on the left side menu.
The "System Settings File" screen appears.
3. | Enter a backup file to restore from. | 4 |
| ||
| Press the [Browse] button to select a file. |
|
4. | Press the [Restore] button. |
|
| ||
| A confirmation message appears. |
|
5. | Press the [Yes] button. |
|
| After factory default settings have been restored, the scanner is restarted. |
|
ATTENTION
HINT
During system settings restoration, do not press and hold down the startup button for longer than 4 seconds, as it may cause the scanner to function abnormally.
The network interface connection will be lost when the scanner is restarted to complete the restoration of the system settings. To continue with other settings, wait a short time for the device to restart, then login to the network interface again.
As the network interface connection to the scanner requires the IP address or scanner name, if this is changed by the restoration of the system settings (i.e. if the backed up IP address or scanner name is different to the
| 173 | |
| ||
|
|
|