4.5iScanner Administrator Login: via the Admin Tool
4.5iScanner Administrator Login: via the Admin Tool
The Admin Tool can be set up to manage the scanner via a computer.
This section explains how to login using the Admin Tool.
ATTENTION
zIf the normal screen display does not appear (for example: an "X" mark appears), wait for a few minutes and try again. If the problem still occurs, contact your FUJITSU scanner dealer or an authorized FUJITSU scanner service provider.
zIf a button is rapidly pressed many times in succession, a "The page can- not be displayed" message may appear. Selecting another tab or reloading the page will refresh the screen.
HINT
z For details about setting up to manage the scanner via a computer, refer to | 4 |
| |
|
zThe user name and initial password for the administrator are as follows: User Name: admin
Password: password
zThe scanner setup can be configured by one user.
zSession timeout time is 20 minutes (fixed). The session timeout time is extended by a further 20 minutes for the following:
z when a tab on the top menu or left side menu is pressed z when the [OK] button is pressed
| 53 | |
| ||
|
|
|