
HINT
zAutomatic updates start when the scanner is in a standby mode or when no user is logged in while it is turned on.
Even if notifications from the Central Admin Server or
zIf a user is logged in at the scheduled date and time, updates start after the user has logged out.
zIt takes approximately 10 minutes to enable this setting. Therefore, make sure that the scheduled date and time starts at least 10 minutes after the setting is made.
zWhen the setting for an automatic update from the Central Admin Server is distributed to the scanners, if the update is scheduled to start within ten minutes after the setting was distributed, the setting will not be applied.
To enable new system settings in an environment where update calls cannot be issued, scanners must be restarted or logged out.
In order to prevent software updates from running at the same time, enable software update
zIf the scheduled automatic update time is set in both the Central Admin Console and with the Admin Tool, the most recent settings will be enabled.
Select the [Off] button to disable automatic updates.
9. Press the [OK] button.
HINT
The Central Admin Server settings are set.
The scanner information is transmitted to the Central Admin Server.
If the process is successful, the text will change to "This scanner's
zFor details about the settings required to use SSL for communication between the Central Admin Server and scanner, refer to "4.7.2 Setting the Admin Net- work" (page 88).
zWhen user roaming or job settings enabled, if communication with the Central Admin Server is not possible a confirmation message will appear at login.
If [OK] is selected, the settings information saved in the scanner are used. Selecting the [Cancel] button returns to the login screen.
92