2.2 Using the Scanner Buttons

The idle time before standby mode entered can be changed. For details, refer to "4.6.6 Setting the Time to Standby Mode" (page 66).

 

 

 

 

 

 

 

 

 

 

 

When the scanner is starting up or in standby mode, be careful to never

 

ATTENTION

 

 

 

 

 

 

hold the startup button down for 4 seconds, as this will cause the scanner to

 

 

 

 

 

 

 

 

 

 

 

 

shutdown. If this happens, saved scanned data may become unusable.

 

 

 

 

 

 

 

 

 

 

 

 

If the startup button is accidentally held down too long, causing the scanner

 

 

 

 

 

 

 

 

 

 

 

 

to shutdown, temporally detach the AC adaptor to ensure that the power is

 

 

 

 

 

 

2

 

 

 

 

 

 

 

 

 

 

 

completely off.

 

 

 

 

 

 

 

 

 

 

 

After turning the power off, wait for at least 10 seconds before turning the

 

 

 

 

 

 

 

 

 

 

 

power back on again. To shutdown the scanner correctly, press the [Shut-

 

 

 

 

 

 

 

 

 

 

 

down] button on the "Login" screen.

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

HINT

Automatic login without displaying the "Login" screen is possible. For more details about how to set automatic login, refer to "4.6.7 Setting the Login Method" (page 68).

2.2.2 Using the Top Cover [SCAN] Button

When the icon is displayed in a [Scan] button on the touch panel, either the touch panel [Scan] button or top cover [SCAN] button may be pressed to start the scan.

[SCAN] button (top cover)

The touch panel [Scan] button may appear as follows:

z[Scan]

z[Scan & Send]

z[Scan & Print]

z[Scan & Save]

z[Scan More]

fi-6010N Network Scanner Operator's Guide

 

27