ATTENTION

zCarbonless paper contains chemical substances that may damage the pad assy or the pick and other rollers when documents are fed. Pay attention to the following:

Cleaning:

If pick errors occur frequently, clean the pad assy and pick roller.

For details on cleaning the pad assy and pick roller, refer to "Chapter 7 Scanner Care" (page 423).

Replacing parts:

The service life of the pad assy and pick roller may be shortened when compared to scanning only wood containing paper documents.

zWhen wood containing paper manuscripts are scanned, the life of the pad assy and pick roller may be shortened compared with the case where woodfree paper manuscripts are scanned.

zWhen scanning photographs, the face of the photograph may become damaged.

HINT

zWhen scanning semi-transparent documents, set the scan [Brightness] to "Light" to avoid image bleed through.

zTo prevent the rollers from becoming dirty, avoid scanning documents con- taining large areas written or filled in with pencil. If scanning of such docu- ments is unavoidable, clean the rollers frequently.

zTo operate correctly, the ADF requires the leading edges of all document sheets be evenly aligned. Make sure that curling of the leading edge is within the following tolerances:

More than

 

30mm

Feed direction

 

Less than 3mm

Leading edge

Side being

of document

scanned

More than

 

30mm

Feed direction

 

Less than 5mm

 

Leading edge

Side being

of document

scanned

480