4.7 Using the Network Settings Menus
4. Press the [OK] button.
The information entered is set.
z If the IP address is the same as one already in use, network communica-
HINT |
| tion problems will occur. In this case, try the following steps: |
|
| |
|
| 1. Disconnect the LAN cable, and press the [Shutdown] button on the |
|
| |
|
| touch panel to turn the scanner off. |
2.Reboot the scanner with the LAN cable disconnected, and enter a nonduplicate IP address.
3.
z When DHCP is set to "On", the following scanner settings are assigned |
| ||
by the DHCP server: |
| ||
z | IP Address |
| |
z | Subnet Mask |
| |
z | Default Gateway |
| |
z | DNS Server |
| |
z | WINS Server |
| |
z | Domain Suffix |
| |
Even if DNS or WINS server is set, priority is given to the scanner set- |
| ||
4 | |||
tings over the DHCP settings. | |||
z The connection will be lost if the scanner's IP address is changed via the | |||
network interface. If connecting via an IP address, to continue with other | |||
settings, login to the network interface again using the new IP address. |
| ||
| |||
| 87 | |
| ||
|
|
|